Sistem Informasi Iklim dan Kualitas Udara pada Laboratorium Kalibrasi BMKG Berbasis Website
DOI:
https://doi.org/10.54259/satesi.v4i2.3299Keywords:
Calibration Results, Accuracy, Precision, Temperature RangeAbstract
To ensure the reliability of measurement results, the calibration laboratory of the Indonesian Agency for Meteorology, Climatology, and Geophysics (BMKG) requires accurate control of temperature and humidity. Conventional manual monitoring methods are susceptible to errors caused by human interaction and environmental fluctuations. To address this challenge, a web-based monitoring system has been developed. This system automates the measurement of temperature and humidity, thereby increasing efficiency and reducing the risk of human error. Two prototype meters have been integrated into the system, which have been proven to have an accuracy of over 90% for temperature measurements. The system is capable of measuring humidity in the range of 0% to 100% with an accuracy of ±5% and temperature in the range of -40°C to 80°C with an accuracy of ±0.1°C. By automating the monitoring process and providing real-time data access, this system makes a significant contribution to improving the reliability and efficiency of the BMKG calibration laboratory. The implementation of this system is expected to ensure the consistency of calibration measurement results, support the optimal functioning of the laboratory, and contribute to improving the quality of meteorological, climatological, and geophysical services in Indonesia.
Downloads
References
S. I. Jumaila dan S. Maulida, “Pemantauan Suhu dan Kelembaban di Laboratorium Kalibrasi Tekanan dan Volume Berbasis Web Secara Real Time,” Jurnal Otomasi Kontrol dan Instrumentasi, vol. 9, no. 1, hlm. 9, Mei 2018, doi: 10.5614/joki.2017.9.1.2.
M. P. Awalliza dan B. Nugraha, “RANCANG BANGUN SISTEM MONITORING SUHU PADA STASIUN TRANSMISI METRO TV JAKARTA DENGAN WEB BERBASIS ARDUINO UNO DAN SIM908,” vol. 8, no. 3, 2017.
B. A. Sakti dan S. Prasetya, “Analisis Pemilihan Sensor dan Ketelitian pada Rancang Bangun Weather Station Sebagai Monitoring System Cuaca Area Politeknik Negeri Jakarta,” 2022.
E. S. Puspita dan L. Yulianti, “PERANCANGAN SISTEM PERAMALAN CUACA BERBASIS LOGIKA FUZZY,” J. n.a Infotama, vol. 12, no. 1, Feb 2016, doi: 10.37676/jmi.v12i1.267.
L. Ristiari dan I. K. A. Mogi, “WEBSITE SISTEM INFORMASI KALIBRASI BALAI BESAR METEOROLOGI KLIMATOLOGI DAN GEOFISIKA WILAYAH III”.
S. Anwar, “Peramalan Suhu Udara Jangka Pendek di Kota Banda Aceh dengan Metode Autoregressive Integrated Moving Average (ARIMA),” MJMST, vol. 5, no. 1, hlm. 6, Apr 2017, doi: 10.29103/mjmst.v5i1.10882.
S. S. Siregar, “Aplikasi Jaringan Syaraf Tiruan (JST) Backpropagation untuk Prediksi Cuaca Harian di Wilayah Banjarbaru”.
A. Fadholi, “STUDY PENGARUH SUHU DAN TEKANAN UDARA TERHADAP OPERASI PENERBANGAN DI BANDARA H.A.S. HANANJOEDDIN BULUH TUMBANG BELITUNG PERIODE 1980-2010,” J. Penelit. Fis. Apl., vol. 3, no. 1, hlm. 1, Jun 2013, doi: 10.26740/jpfa.v3n1.p1-10.
Y. S. Swarinoto dan S. Sugiyono, “PEMANFAATAN SUHU UDARA DAN KELEMBAPAN UDARA DALAM PERSAMAAN REGRESI UNTUK SIMULASI PREDIKSI TOTAL HUJAN BULANAN DI BANDAR LAMPUNG,” JMG, vol. 12, no. 3, Des 2011, doi: 10.31172/jmg.v12i3.109.
R. Samsinar, R. Septian, dan F. Fadliondi, “Alat Monitoring Suhu Kelembapan dan Kecepatan Angin dengan Akuisisi Database Berbasis Raspberry Pi,” RESISTOR, vol. 3, no. 1, hlm. 29, Mei 2020, doi: 10.24853/resistor.3.1.29-36.
Y. P. Putra, “Rancang Bangun Papan Informasi Cuaca Berbasis ArduinoDan Visual Basic Menggunakan Teknik Simplex,” 2020.
D. S. E. Estu, Meta Yantidewi, M. Biyadhie Adikuasa, Bim Maulana Rusdi, dan Muhimmatul Khoiro, “Alat Monitoring Ketinggian Air Laut Berbasis IOT dengan Nodemcu ESP32 DAN HC-SR04: IOT-Based Sea Water Level Monitoring Tool with Nodemcu ESP32 and HC-SR04,” J Kol Sai, vol. 6, no. 7, hlm. 586–597, Jul 2023, doi: 10.56338/jks.v6i7.3782.
M. Awaluddin, S. Syahrir, dan A. Zarkasi, “Rancang Bangun Prototipe Monitoring Suhu dan Kelembaban Udara Berbasis Internet Of Things (IOT) Pada Laboratorium Kalibrasi Balai Pengujian dan Sertifikasi Mutu Barang Samarinda,” PPJ, vol. 3, no. 1, hlm. 132, Jun 2022, doi: 10.30872/ppj.v3i1.910.
R. Fauzi, “PENGEMBANGAN PERANGKAT SISTEM MONITORING KUALITAS UDARA LABORATORIUM BERBASIS HYBRID WIRELESS SENSOR NETWORK SIONLAP”.
E. Grandjean, “Fitting the Task to the Man", 4th Edition. London: Taylor & Francis, 1993.
Sulistyo, “PENGGUNAAN STIMULATOR PLUS PADA PROSES FERMENTASI JERAMI PADI DALAM PRAKTIKUM TEKNOLOGI PENGOLAHAN PAKAN,” Jul 2019, doi: 10.5281/ZENODO.3270926.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 M. Audi Ikhsan, Samsudin Samsudin
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
