Pengelolaan Sampah Plastik Bertenaga Surya di Kawasan Wisata Megalitikum Gunung Padang Cianjur
DOI:
https://doi.org/10.54259/pakmas.v6i1.5954Keywords:
Plastic Waste, Processing Management, Solar PowerAbstract
As a prehistoric site of Megalithic culture in West Java dating back 10,000-25,000 BC, Gunung Padang is a highly potential tourist attraction. The uniqueness of this tourist area attracts many tourists, both local and foreign, to visit. In addition to bringing positive economic impacts to the community through the sale of various local products such as palm sugar, honey, souvenirs, and homestay businesses around the tourist area, the local government also receives additional income through levies imposed on visitors. On the other hand, the arrival of tourists also results in waste generated from tourist activities while in the Gunung Padang tourist area. So far, Pokdarwis has been trying to handle the waste by collecting, stockpiling, and burning it. This method is certainly not a solution that can be continued in the long term. This community service activity was carried out to provide a better understanding of proper waste management and to provide solar-powered waste processing machines, considering that the Gunung Padang tourist site has great potential for solar energy as an energy source.
Downloads
References
Abdurachman, Alamsyah, & Yudha C.U., Rancangan, (2020). Simulasi Mesin Pencacah Sampah Plastik Jenis Pete Dan Ldpe Metode “Single Group Cutter”, Proyek Akhir, Politeknik Manufaktur Negeri Bangka Belitung
Akbar, Ali, (2013). Situs Gunung Padang Misteri dan Arkeologi. Jakarta: Change Publication
Kementerian Pendidikan dan Kebudayaan RI, "Gunung Padang, Situs Megalitikum Terbesar di Asia Tenggara".
Kharisma, A.A., Mahesa A, (2023). Pengaruh Kekuatan Mata Pisau Mesin Pencacah Kompos Menggunakan Metode Finite Element Analysis, Jurnal Teknik Mesin Indonesia, Vol. 18, No. 1, https://doi.org/10.36289/jtmi.v18i1.432
Kurniawan, M.T., (2019). Rancang Bangun Mesin Pencacah Plastik Dengan Model Desain Pisau Pemotong Crusher, Skripsi, Jurusan Teknik Mesin, Fakultas Teknik, Universitas Sriwijaya
Laluan D, (2018). The Impact of Tourism on Waste Management in Protected Areas, Journal of Environmental Management, 217, 734-744.
Mardianto, Andi A., Abdul H., & Adriani, (2023). Perancangan Solar Cell Untuk Sumber Energi Listrik Mesin Pompa Air, Jurnal Vertex Elektro, volume 15 Nomor 1, Februari
Muhfidin R, Sely N.S., & Rizqi P., (2024). Analisis Kapasitas Mesin Pencacah Limbah Plastik dan Tekstil Menggunakan Unit Penghancur (Shredder), G-Tech : Jurnal Teknologi Terapan, Vol. 8, No. 3, 1474-1483.
Mulyanto, T., Supriyono, & Rian A.G, (2020). Perancangan Mesin Pengolah Limbah Styrofoam Dengan Metode Sabuk Pemanas, Jurnal Asiimetrik, Volume 2, Nomor 2, 107-114
Mundus, R., Kho Hie Khwee, & Ayong H., (2019). Rancang Bangun Inverter Dengan Menggunakan Sumber Baterai DC 12V, Jurnal Teknik Elektro, Energi, dan Teknologi Informasi (J3EIT), Vol 7, No 2.
Novia, T., (2021). Pengolahan Limbah Sampah Plastik Polytthylene Terephthlate (Pet) Menjadi Bahan Bakar Minyak Dengan Proses Pirolisis, GRAVITASI Jurnal Pendidikan Fisika dan Sains Vol (4) No (01), 33-41.
Nurhayati, Lilik A., & Salamun, (2015). IBM Penerapan Alat Penghancur Sampah Plastik Menggunakan Solar Cell Di Rungkut Barata Surabaya, Prosiding Seminar Nasional Hasil Penelitian dan Pengabdian kepada Masyarakat, LPPM Universitas Negeri Surabaya Surabaya, 279-288,
Pratomo, H.P.S, Hanny H.T, Joni D., Indar S., Iwan & Halim S., (2025). Penggunaan Energi Surya sebagai Tenaga Penggerak Mesin Pencacah Hijauan Pakan Ternak di Dusun Turi, Tulungagung, Agrokreatif, Jurnal Ilmiah Pengabdian kepada Masyarakat, , Vol 11 (1): 38−51
Purba, E., La Ode M. F., (2023). Analisis Perbandingan Pemakaian Solar Cell dan Genset Sebagai Energi Alternatif Penggerak Motor Listrik Pada Pompa Air di Pabrik Pengolahan Kelapa Sawit, Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin, Vol.13, No.1, https://doi.org/10.35814/teknobiz.v13i1.4849
Ramdhan Kurniawan, (2024). Strategi Pemasaran Pariwisata Untuk Meningkatkan Pariwisata Lokal, Jurnal Review Pendidikan Dan Pengajaran, Volume 7 Nomor 3
Salamah, S., Maryudi M., (2019). Daur Ulang Limbah Plastik Jenis Pet (Polyethylene Terepthalate) Dengan Proses Pirolisis Dengan Katalis Silika-Alumina, Jurnal Rekayasa Kimia dan Lingkungan, Vol. 14, No. 1, 104-111.
Subandi, M.S., Syafriudin, Evaristu R., (2019). Penggerak Pompa Air Dengan Tenaga Solar Cell Untuk Meningkatkan Pertanian Cabe, Vol. 4: Proceeding of TEKNOKA National Seminar – 4
Subhidin, I., Eddy D., & Eka M., (2020) Perancangan Mesin Pencacah Plastik Kapasitas 75 Kg/Jam, Seminar Nasional Penelitian LPPM UMJ
Suryadi, A., Haerul P., & Samratul F., (2020). Rancang Bangun Inverter Satu Fasa dengan Variasi Input 12 V DC dan 24 V DC untuk Keluaran 220 V AC, Jurnal Engineering, Vol 2 (1), 1-10
Tarigan, H., Idham K., (2023). Rancang Bangun Panel Boks Kontrol Paralelisasi Generator, Politeknik Negeri Medan, 2019, Medan.
Utomo, L.W. dan Susi A., (2023). Pemanfaatan Limbah Plastik Daur Ulang dari Polietilen Tereftalat (PET) Sebagai Bahan Tambahan dalam Pembuatan Nanokomposit, Semen Mortar, dan Aspal, Jurnal Teknologi Lingkungan Lahan Basah, Vol. 11, No. 1, 164 – 179.
Wati, D.A.R.,, Agung S., (2022) Rancang Bangun Mesin Pencacah Sampah Plastik, STEAM Engineering (Journal of Science, Technology, Education And Mechanical Engineering), Volume 4, Nomor , pp. 9 – 13, https://doi.org/10.37304/jptm.v4i1.5180
Yohanes, E.E.F.S., Enno A.D., Muhammad S.R., Agung P.P., Dinda A.P.H., Risse E.R., (2023). Rancang Alat Pencacah Rumput Pakan Ternak Tenaga Surya Berbasis Mikrokontroller Dengan Sinar Uv Sebagai Penghigienis Rumput, Journal of Engineering Science and Technology (JESTY), Vol. 1, No. 2: 44-52.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Aris Budi Setyawan, Tri Mulyanto, Heru Kuncoro
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
