Pengembangan Kompetensi Calon Guru SD: Desain Modul Praktikum IPA Berbasis STEM Terintegrasi Alat Peraga PjBL
DOI:
https://doi.org/10.54259/diajar.v5i1.7137Keywords:
Science Practicum Module, STEM, Project-Based Learning, Science Process Skills, Prospective Elementary School TeachersAbstract
Motivated by the need for learning tools that can enhance science process skills and conceptual understanding of prospective elementary school teachers. Science practicum activities that have been carried out so far are still limited to conventional modules and have not been fully integrated with teaching aids produced through Project-Based Learning (PjBL). This study aims to develop a STEM-based science practicum module through PjBL-produced teaching aids that are valid, practical, and effective for prospective elementary school teachers. The research employed a research and development (R&D) approach with the ADDIE model, which includes the stages of analysis, design, development, implementation, and evaluation. The research subjects were fourth-semester students of the Elementary School Teacher Education (PGSD) program at a university in North Maluku, with a total of 80 participants. Research instruments included expert validation sheets, practicality questionnaires, science process skills observation sheets, and learning outcome tests (pretest–posttest). Data were analyzed using descriptive quantitative, qualitative, and inferential methods with gain scores and paired t-tests. The results showed that the STEM-based science practicum module received a very good category from expert validators (average score 4.55), was rated practical by students (average score 4.35), and was effective in improving science process skills and learning outcomes with gain scores ranging from 0.51 to 0.62, categorized as moderate to high. It can be concluded that the developed practicum module is feasible to be used as a science learning tool in PGSD/FKIP and can help equip prospective teachers with scientific and pedagogical competencies relevant to the demands of the 21st century.
Downloads
References
Zaky Adhitya Ginanjar Sasmita, Wahono Widodo, & Sifak Indana. (2021). Contextual Based Learning Media Development to Train Creative Thinking Skill in Primary School. IJORER : International Journal of Recent Educational Research, 2(4), 468–476. https://doi.org/10.46245/ijorer.v2i4.124
Marjanah, M., Pandia, E., & Nursamsu, N. (2021). Development of Practicum Instruction Module Based on Project Based Learning (PjBL) Integrated with Science Process Skills and Scientific Literacy. Jurnal Penelitian Pendidikan IPA, 7(SpecialIssue), 104–111. https://doi.org/10.29303/jppipa.v7ispecialissue.874
Wola, B. R., Rungkat, J. A., & Harindah, G. M. D. (2023). Science process skills of prospective science teachers’ in practicum activity at the laboratory. Jurnal Inovasi Pendidikan IPA, 9(1), 50–61. https://doi.org/10.21831/jipi.v9i1.52974
Wardani, I. S., & Fiorintina, E. (2023). Building Critical Thinking Skills of 21st Century Students through Problem Based Learning Model. JPI (Jurnal Pendidikan Indonesia), 12(3), 461–470. https://doi.org/10.23887/jpiundiksha.v12i3.58789
Kelley. (2016). Kelley, T. R. & Knowles, J. G. 2016, ‘A conceptual framework for integrated STEM education’,. Conceptual Framework for Integrated STEM Education’, International Journal of STEM Education, 3(11), 3–4.
Erlina, N., Warpala, I. W. S., & Juniartina, P. P. (2023). Kesiapan Calon Guru IPA dalam Pengembangan Alat Peraga 3D berbasis Eco-Friendly melalui Project Based Blended Learning. Jurnal Pendidikan Dan Pembelajaran Sains Indonesia, 6, 152–161.
Ivan Centeno Lacanilao, & Angelito S. Manalastas. (2023). Development and validation of instructional learning module in tailoring. World Journal of Advanced Research and Reviews, 20(1), 1071–1088. https://doi.org/10.30574/wjarr.2023.20.1.2166
Laily Yunita Susanti. (2022). Pengembangan Modul Praktikum berbasis Green Chemistry untuk Menanamkan Karakter Peduli Lingkungan pada Calon Guru IPA. Jurnal Pendidikan Mipa, 12(3), 798–807. https://doi.org/10.37630/jpm.v12i3.657
Arnita Sari, Y. (2019). Penerapan Pembelajaran Berbasis Praktikum Untuk Meningkatkan Keterampilan Proses Sains Dan Sikap Ilmiah Siswa Smk Pada Materi Bakteri. SINAU : Jurnal Ilmu Pendidikan Dan Humaniora, 5(2), 60–77. https://doi.org/10.37842/sinau.v5i2.55
Hu, W., & Guo, X. (2021). Toward the Development of Key Competencies: A Conceptual Framework for the STEM Curriculum Design and a Case Study. Frontiers in Education, 6(October), 1–12. https://doi.org/10.3389/feduc.2021.684265
Nikmah, M., Yudiyanto, Y., Wahyuni, S., & Ikashaum, F. (2022). Motivasi Belajar Matematika Siswa Saat Pembelajaran Daring. Kognitif: Jurnal Riset HOTS Pendidikan Matematika, 2(1), 19–25. https://doi.org/10.51574/kognitif.v2i1.416
Rahman, I., Kaema, M. T., Nurhapipah, N., Nelwati, S., Sabri, A., & Rahmanda, R. (2024). Systematic Literature Review: Analysis of Project-based Learning Models from Elementary to High School. Al-Ashri: Ilmu-Ilmu Keislaman, 9(2), 53–66.
Puspitasari, E. (2020). Project-based Learning Implementation to Cultivate Preservice English Teachers’ 21st Century Skills. IJELTAL (Indonesian Journal of English Language Teaching and Applied Linguistics), 5(1), 191. https://doi.org/10.21093/ijeltal.v5i1.638
Hasanah Dewi Lestari, D. R. M. H. U. (2023). Application of the Addie Model in Designing Digital Teaching Materials. Jurnal Pendidikan Dan Pengajaran Guru Sekolah Dasar (JPPGuseda), 6(1), 105–109. https://doi.org/10.55215/jppguseda.v6i1.7525
Sarapung, R. R. (2025). the Development of a Stem-Oriented Science Teaching Aid Prototype Through Project-Based Learning Utilizing Diverse Local Resource Materials. EDUPROXIMA : Jurnal Ilmiah Pendidikan IPA, 7(3), 1135–1148. https://doi.org/10.29100/.v7i3.8480
Rayment, S., Evans, J. R., Coffey, M., Kirk, S., Sivasubramaniam, S. Das, & Moss, K. (2023). The Role of Technology in Undergraduate Bioscience Laboratory Learning: Bridging the Gap between Theory and Practice. Education Sciences, 13(8). https://doi.org/10.3390/educsci13080766
Branch, R. M. (2010). Instructional design: The ADDIE approach. Instructional Design: The ADDIE Approach, 1–203. https://doi.org/10.1007/978-0-387-09506-6
Ananda, P. N., & Usmeldi, U. (2023). Validity and Practicality of E-Module Model Inquiry Based Online Learning to Improve Student Competence. Jurnal Penelitian Pendidikan IPA, 9(4), 2010–2017. https://doi.org/10.29303/jppipa.v9i4.3563
Hake, R. R. (1998). Interactive-engagement versus traditional methods: A six-thousand-student survey of mechanics test data for introductory physics courses. American Journal of Physics, 66(1), 64–74. https://doi.org/10.1119/1.18809
TATLI, Z., GÜLAY, A., MURADOĞLU, B., & BEKAR, Ş. N. (2023). Evaluation of digital instructional materials developed by primary school teacher candidates with different learning styles. Journal of Educational Technology and Online Learning, 6(3), 578–601. https://doi.org/10.31681/jetol.1222327
Maulana, A., & Syihabuddin. (2025). Constructivist Philosophy of Student-Centred Learning Approach in Indonesian Higher Education Context. Professional Journal of English Education, 8(2), 516–526.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Risky Richlos Sarapung
This work is licensed under a Creative Commons Attribution 4.0 International License.
Hak cipta pada setiap artikel adalah milik penulis.
Penulis mengakui bahwa DIAJAR (Jurnal Pendidikan dan Pembelajaran) sebagai publisher yang mempublikasikan pertama kali dengan lisensi Creative Commons Attribution 4.0 International License.
Penulis dapat memasukan tulisan secara terpisah, mengatur distribusi non-ekskulif dari naskah yang telah terbit di jurnal ini kedalam versi yang lain, seperti: dikirim ke respository institusi penulis, publikasi kedalam buku, dan lain-lain. Dengan mengakui bahwa naskah telah terbit pertama kali pada DIAJAR (Jurnal Pendidikan dan Pembelajaran).
