Pengaruh Penambahan Nilon Thermoplastik Daur Ulang pada Nilon Thermoplastik Murni terhadap Modulus Elastisitas Basis Gigi Tiruan
DOI:
https://doi.org/10.54259/sehatrakyat.v5i3.7670Keywords:
Denture Base, Thermosens, Modulus of Elasticity, Pure Thermoplastic NylonAbstract
The use of thermoplastic nylon denture bases produces waste that causes environmental pollution. To overcome this environmental pollution, the remaining nylon can be recycled into denture bases. The purpose of this study was to determine the effect of adding recycled thermoplastic nylon to pure thermoplastic nylon on the modulus of elasticity of denture bases. The laboratory experiment research method was carried out in the laboratory of the Dental Engineering Study Program D III, Universitas Megarezky, Makassar and the Mechanical Laboratory of the Ujung Pandang State Polytechnic. This study used Thermoplastic Nylon material, in this case using Thermoset material which was divided into 4 sample groups, namely: pure Thermoplastic Nylon (Sample A), a combination of 75% pure Thermoplastic Nylon with 25% recycled Thermoplastic Nylon (Sample B), a combination of 50% pure Thermoplastic Nylon with 50% recycled Thermoplastic Nylon (Sample C), 100% recycled Thermoplastic Nylon (Sample D). The results of the study showed that the modulus of elasticity with an average value for the pure Thermoplastic Nylon group was 832.97 MPa, the 75% pure Thermoplastic Nylon 25% Recycled Thermoplastic Nylon group was 831.29 MPa, the 50% pure Thermoplastic Nylon 50% Recycled Thermoplastic Nylon group was 830.11 Mpa and the highest was the 100% Recycled Thermoplastic Nylon group, which was 851.44 MPa. In conclusion, the addition of recycled thermoplastic nylon to pure thermoplastic nylon can cause changes in the modulus of elasticity in the form of a lack of flexibility of the denture base.
Downloads
References
Alfahdawi, I. H. (2025). Polymeric additions effect on mechanical properties of heat-polymerized denture base resin: An in vitro study. Discover Materials, 5(1), 97. https://doi.org/10.1007/s43939-025-00279-7
Grigore, E. (2017). Methods of Recycling , Properties and Applications of Recycled Thermoplastic Polymers. Recycling, 2(24), 1–11. https://doi.org/10.3390/recycling2040024
Hutauruk, N., & Tarigan, S. (2022). Pengaruh Lama Perendaman Bahan Basis Gigi Nilon Termoplastik Dalam Ekstrak Jeruk Nipis (Citrus Aurantifolia) Terhadap Perubahan Dimensi. Cakradonya Dent J, 14(1), 41–47.
Jannah, M. K., & Zulkarnain, M. (2022). Pengaruh perendaman cuka sari apel terhadap stabilitas warna dan kekuatan fleksural basis gigi tiruan nilon termoplastik. https://doi.org/10.24198/pjdrs.v6i1.33156
Martin, N., Mulligan, S., Fuzesi, P., & Hatton, P. V. (2022). Quantification of single use plastics waste generated in clinical dental practice and hospital settings. Journal of Dentistry, 118, 103948. https://doi.org/10.1016/j.jdent.2022.103948
Myke, D., & Arsanti, M. (2023). Analisis Material Dasar Komponen Gigi Tiruan Lepasan Yang Biokompatibel Dengan Jaringan Oral Gigi. ReearchGate.
Naji, G. A.-H. (2020). Influence of Various Chemical Surface Treatments, Repair Materials, and Techniques on Transverse Strength of Thermoplastic Nylon Denture Base. International Journal of Dentistry, 2020, 1–10. https://doi.org/10.1155/2020/8432143
Ong, A., Teo, J. Y. Q., Watts, D. C., Silikas, N., Lim, J. Y. C., & Rosa, V. (2024). The global burden of plastics in oral health: Prospects for circularity, sustainable materials development and practice. RSC Sustainability, 2(4), 881–902. https://doi.org/10.1039/D3SU00364G
Priskila, R., Warinussy, L., Kristiana, D., & Soesetijo, F. X. A. (2018). Pengaruh Perendaman Nilon Termoplastik Dalam Berbagai Konsentrasi Ekstrak Bunga Cengkeh Terhadap Modulus Elastisitas ( The Effect of Thermoplastic Nylon Immersion In Various Con- centration of Clove Flower Extract to the Modulus Elasticity ). E-Journal Pustaka Kesehatan, 6(1), 179–185.
Putri, A. C., Wahyuni, S., Alumni, J., Kampus, N., Medan, U. S. U., & Kunci, K. (2015). Pengaruh Penambahan Serat Kaca Pada Nilon Termoplastik Daur Ulang Terhadap Kekeuatan Impak. B-Dent: Jurnal Kedokteran Gigi Universitas Baiturrahmah, 7(1), 27–37.
Rizani, M., & Nasution, H. (2019). Kekuatan Ikat Geser Gigi Artifisial Akrilik dan Porselen Pada Tiga Macam Basis Gigi Tiruan Nilon Termoplastik. J Ked Gi Unpad, 1(31), 8–14. https://doi.org/10.24198/jkg.v31i1.19025
Rosmaladewi Talli & Ana Aulia Ilmi. (2022). Prosedur Pembuatan Jacket Crown Berbahan IPS E-Max Press Pada Gigi Incisivus Centralis Regio Maxilla Sinistra. Inhealth: Indonesian Health Journal, 1(1), 35–47. https://doi.org/10.56314/inhealth.v1i1.22
Safina, H., & Wahyuni, S. (2020). Pengaruh Penambahan Serat Kaca Pada Bahan Basis Gigi Tiruan Nilon Termoplastik Daur Ulang Terhadap Kekuatan Transversal dan Modulus Elatisitas. B-Dent: Jurnal Kedokteran Gigi Universitas Baiturrahmah, 7(1), 38–47.
Setyowati, O., & Wahyuni, S. (2019). Pattern Of Demand For Making Dentures at Dental Laboratory in Surabaya City,Indonesia. Journal of V, 03, 1–5. https://doi.org/10.20473/jvhs.V3I1.2019.1-5
Song, S., Kim, K., Lee, J., & Shin, S. (2019). Physical properties and color stability of injection-molded thermoplastic denture base resins. 32–40.
Srinivasan, N., & Dhanraj. (2017). Polyamide As A Denture Base Material-A Review. International Journal of Current Advanced Research, 6(4), 3272–3274. https://doi.org/http://dx.doi.org/10.24327/ijcar.2017.3274.0244
Wowor, V. N. S., & Mintjelungan, C. N. (2019). Efektivitas Penggunaan Gigi Tiruan Sebagian Lepasan terhadap Fungsi Pengunyahan pada Masyarakat Desa Pinasungkulan Kecamatan Modoinding. Jurnal E-Gigi (eG), 293, 81–86.
Z Tamin, H., Wahyuni, S., & Nasution, I. D. (2019). Utilization of Recycled Thermoplastic Nylon Combined with Virgin Nylon and the Effect on its Mechanical Properties as a Denture Base Material. Dental Research and Management, 51–55. https://doi.org/10.33805/2572-6978.128
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Magfira Magfira, Isma Suprapti, Sri Irmayana
This work is licensed under a Creative Commons Attribution 4.0 International License.
Hak cipta pada setiap artikel adalah milik penulis.
Penulis mengakui bahwa SEHATRAKYAT (Jurnal Kesehatan Masyarakat) sebagai publisher yang mempublikasikan pertama kali dengan lisensi Creative Commons Attribution 4.0 International License.
Penulis dapat memasukan tulisan secara terpisah, mengatur distribusi non-ekskulif dari naskah yang telah terbit di jurnal ini kedalam versi yang lain, seperti: dikirim ke respository institusi penulis, publikasi kedalam buku, dan lain-lain. Dengan mengakui bahwa naskah telah terbit pertama kali pada SEHATRAKYAT (Jurnal Kesehatan Masyarakat).
